Chitongda YL-007M2 Manual de usuario descargar pdf (Pagina 22)

After the setting, the host makes a "Di" sound, ARM LED is on and you

will receive a SMS: System armed.

5. Disarm

It means to stop the alarm when the main unit sounds the alarm or make

the alarm system in the state of non-warning. After disarming, even if you

trigger the detector, the main unit would not sound alarm (excluding

24-hour defense areas).

Use keypad to input system password, then press [#] button. [Out Home]

or [At Home] lights will be off. It means disarm setting successful.

Remote Control Operation: Press [ ] button on remote controller

Main Unit Operation: input system password + [#]

LCD display:

You can also set disarm by SMS remotely. The SMS command is:

Remote Control Password (Default: 1234) + [2]

After the setting, the host makes "Di" Di" sound, ARM LED is off and

you will receive a SMS: System disarmed.

Note: If you send arm or disarm SMS by the mobile phone number

stored in the system before (refer to “SMS Receiving Number Setting),

you will receive two arm/disarm SMS.

6. Answer Alarm Call

When the main unit sounds alarm, it will dial the preset numbers. If no

one answers the call, the system will call the next user number

automatically. The system will call each preset numbers for 3 times in

order.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Sin comentarios

Chitongda YL-007M2 Manual de usuario Pagina 22