Chitongda YL-007M2 Manual de usuario descargar pdf (Pagina 15)

In setup state, input the command: 45 + [XX] + #

XX indicates: the delay time of alarm; XX= 01-99: 1 sec to 99 sec

Note: The setting is effective only when a zone is set as Alarm Delay

Zone.

Note: Before the system enters arm or alarm status it will emit a "Di"

sound per second.

16. Alarm Number Setting

In setup state, input [51] ~ [56], then input the voice alarm-receiving

number (mobile number or telephone number), and then press [#] to

confirm. The main unit will make a long beep, the [Signal] indicator will

flicker once, and you will hear “setting completed”, which indicate voice

alarm-receiving number is set successfully.

Operating method: [XX]  [YY…YY]  [#]

XX indicates: the 1- 6 alarming user number [51] ~ [56]

YY…YY indicates: voice alarm-receiving phone number

For example: set 13811111111 as the first voice call number

Operating method: [51]  [13811111111]  [#]

LCD display:

17. Delete Phone Number

In setup state, input [51] ~ [56], and then press [#] to confirm, the main

unit will make a long beep and the [Signal] indicator will flicker once and

you will hear “delete completed”, which indicate the alarming user

number is deleted successfully.

Operating method: [XX]  [#]

XX indicates: the 1- 6 alarming user number [51] ~ [56]

For example: Delete the third alarming user number from the system.

Operating method: [53]  [#]

LCD display:

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Sin comentarios

Chitongda YL-007M2 Manual de usuario Pagina 15