Chitongda YL-007M2 Manual de usuario descargar pdf (Pagina 20)

confirm; voice prompts: setting completed, please enter instruction.

Operating method:【83】【A】【#】

A indicates: [1]: activate voice prompt for arm/ disarm (factory default)

[0]: deactivate voice prompt for arm/ disarm

27. Voice Prompt for All Settings

For above settings, you could hear the voice prompt such as “setting

completed, please enter instruction”, “delete completed”. You can

deactivate the voice if you do not need them.

In setting status, first input [84], then [0/1] and finally press [#] to

confirm; voice prompts: setting completed, please enter instruction.

Operating method:【84】【A】【#】

A indicates: [1]: activate voice prompt for arm/ disarm (factory default)

[0]: deactivate voice prompt for arm/ disarm

Note: after you deactivate this function, all the voice including arm/

disarm voice would not work.

[Operation Instructions]

1. System status. There are 4 status as following:

 Arm: defense zone 1~99 will alarm when detectors are triggered

 Home Arm: in arm status, the defense zone which is set as [Home

Arm] will alarm when detectors are triggered.

 Disarm: defense zone 1~99 will not alarm when detector triggered

(except 24 hours defense zone)

 System setup status: In this status, all defense zones will not alarm

when detectors are triggered.

2. Remote Controller Operation

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Sin comentarios

Chitongda YL-007M2 Manual de usuario Pagina 20